Enough capacity for the heaviest loads
A heavy-duty 15,000 lb. capacity winch with a 4.6hp series wound motor. Direct drive cone braking system. Control pack is designed for clearance and ease of access. Comes with 90′ of 7/16″ wire rope.
Part number: M15000-47801 (12V) |
Part number: CEM15000-478022 (24V) |
Rated Line Pull: 15,000 lbs. (6804 kgs) single-line |
Motor: Series Wound, 12V 4.6 hp, 24V 2.5 hp |
Electrical controls: Contactor |
Remote Control: Remote switch, 12 ft (3.7m) lead |
Geartrain: 3-Stage Planetary |
Gear ratio: 315:1 |
Clutch (freespooling): Rotating Ring Gear |
Brake: Automatic mechanical cone |
Drum diameter/Length: 3.5 in /8.2 in (9cm/21cm) |
Weight: 136 lbs. (62kgs.) |
Wire rope: 90 ft, 7/16 in (27m, 11mm) diameter |
Fairlead: Roller |
Recommended Battery: 650 CCA minimum for winching |
Battery leads: 2 gauge, 72 in (1.83m) |
Finish: Argent Gray Powder Coat |
Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
0 | 22.2(6.77) | 67 amps | 1/15000(6804) |
2000(910) | 7.27(2.22) | 135 amps | 2/13890(6300) |
4000(1810) | 5.41(1.65) | 185 amps | 3/11520(5225) |
6000(2720) | 4.43(1.35) | 235 amps | 4/9840(4463) |
8000(3630) | 3.79(1.16) | 285 amps | |
10000(4540) | 3.31(1.01) | 335 amps | |
12000(5440) | 2.93(.893) | 385 amps | |
14000(6350) | 2.61(.796) | 435 amps | |
15000(6800) | 2.48(.756) | 460 amps |
Line Pull Lbs.(Kgs.) |
Line Speed FT./min(M/min.) |
Motor Current |
Pull by layer layer/Lbs(Kgs.) |
0 | 28(8.6) | 24 amps | 1/15000(6800) |
2200(1000) | 10.2(3.1) | 85 amps | 2/13900(6300) |
4400(2000) | 7.5(2.3) | 115 amps | 3/11400(5200) |
6600(3000) | 6.9(2.1) | 142 amps | 4/9700(4400) |
8800(4000) | 6.6(2.0) | 170 amps | |
11000(5000) | 6.2(1.9) | 190 amps | |
13200(6000) | 5.2(1.6) | 210 amps | |
15000(6800) | 4.3(1.3) | 235 amps |
Dimensions | 25.2″ L. x 8.5″ D. x 11″ H. (640mm L. x 215mm D. x 279mm H.) |
---|---|
Mounting Bolt Pattern | 10.0″ x 4.5″ (254mm x 114.3mm) |